ANGLE-FLEXIBRUSH

ANGLE-FLEXIBRUSH

ANGLE-FLEXIBRUSH Angle brushing tool

FEATURES:

The angle brushing tools ANGLE-FLEXIBRUSH Series 100 can be used for deburring after machining, rounding of sharp edges or, depending on the brush
type, for light deflashing tasks.

It is particularly well suited to work in badly accessible areas.
The brushing spindle is axially compliant while the necessary pressure is monitored by
program control.
The wear of the brush is monitored by a sensor and compensated by program control.

The brushing tool can either be mounted stationary onto a tool stand (Toolstand) or onto the robot arm.
If these tools at the robot have to be changed automatically, a tool changing system (Tool-
Changer) is available.


Commercially available cup brushes can be used.

To assure an optimal life of the air motors the compressed air must be cleaned and lubricated.

 Angle-flexibrush 110 Angle-flexibrush 115 Angle-flexibrush 120
Potenza motore
Power
210 W250 W400 W
Velocità rotazione a vuoto
Idling speed
4100 g/min4500 g/min4000 g/min
Movimento di compensazione assiale
Compliance axial movement
12 mm12 mm12 mm
Forza di compensazione a 6 bar
Compliance force at 6 bar
60 N60 N60 N
Avanzamento
Feed forward rate
5-100 mm/sec5-100 mm/sec 5-100 mm/sec
Consumo di aria
Air consumption
5.4 l/sec9 l/sec7.5 l/sec
Ingressi alimentazione aria
Air connections
G1/4, 8/4 mmG1/4, 8/4 mmG1/4, 10/4 mm
Montaggio spazzola
Brush mounting
pinza Ø6 mmpinza Ø6 mmpinza Ø6 mm
Peso
Weight
4 Kg 4 Kg4.6 Kg
Sensore compensazione usura
Sensor wear compensat
24 V induttivo
24 V inductive
24 V induttivo
24 V inductive
24 V induttivo
24 V inductive
Codice articolo
Article-No
3090.2103090.2153090.220
ACCESSORI OPZIONALI
OPTIONAL ACCESSORIES
Codice
Code
Spazzola in carburo di nylon
Brushes, Nyloncarbide
--3050.002
Spazzola in carburo di nylon
Brushes, Nyloncarbide
--3050.001
Mandrino
Drill chuck
--8997.002
PDF