CCR-S

Compliance Device for press fitting with load-cell

with flange – S SERIES

Center Master® compensates for errors (position and/or torsional) occurred during an assembly that various precision parts are press or loose fitted into the holes.

Thereby, it reduces assembly failure, enhances product quality, and shortens the cycle time in production line.

Advantages

  • Significant reduction of assembly failure due to center position errors
  • Uniform press-fitting quality
  • Wide range of applications
  • Increased binding force between parts
  • Saves assembly line construction time, reduces equipment investment cost
  • Enhanced operation rate
  • Longer life cycle of the assembler
  • Simple maintenance

Automatic correction of  a position error

Datasheet3D DrawingModelCapabilityCompliance center lenghtPayloadCompensation range - Position errorCompensation range - Torsional angleAxial direction - CompressionalAxial direction - TensileHorizontal directionTorsional directionWeight
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.
CCR-S4D-070-065-0219.6 N70 mm30 N±2 mm±6.6°1573.9 N/mm191.1 N/mm11.8 N/mm4.2 N/mm1.4 kg
CCR-S4D-070-065-0439.2 N70 mm30 N±2 mm±6.6°1573.9 N/mm191.1 N/mm11.8 N/mm4.2 N/mm1.4 kg
CCR-S4D-070-065-0658.8 N70 mm30 N±2 mm±6.6°1573.9 N/mm191.1 N/mm11.8 N/mm4.2 N/mm1.4 kg
CCR-S4D-090-078-0219.6 N90 mm40 N±2 mm±5.5°1217.2 N/mm225.4 N/mm12.4 N/mm6.1 N/mm2.1 kg
CCR-S4D-090-078-0439.2 N90 mm40 N±2 mm±5.5°1217.2 N/mm225.4 N/mm12.4 N/mm6.1 N/mm2.1 kg
CCR-S4D-090-078-0658.8 N90 mm40 N±2 mm±5.5°1217.2 N/mm225.4 N/mm12.4 N/mm6.1 N/mm2.1 kg
CCR-S4D-110-088-0329.4 N110 mm40 N±2 mm±4.6°1217.2 N/mm225.4 N/mm12.4 N/mm6.1 N/mm2.7 kg
CCR-S4D-110-088-0658.8 N110 mm40 N±2 mm±4.6°1217.2 N/mm225.4 N/mm12.4 N/mm6.1 N/mm2.7 kg
CCR-S4D-110-088-1098.1 N110 mm40 N±2 mm±4.6°1217.2 N/mm225.4 N/mm12.4 N/mm6.1 N/mm2.7 kg
CCR-S4D-140-108-0329.4 N140 mm80 N±2 mm±4.8°1840.4 N/mm407.7 N/mm15.1 N/mm7.7 N/mm4.1 kg
CCR-S4D-140-108-0658.8 N140 mm80 N±2 mm±4.8°1840.4 N/mm407.7 N/mm15.1 N/mm7.7 N/mm4.1 kg
CCR-S4D-140-108-1098.1 N140 mm80 N±2 mm±4.8°1840.4 N/mm407.7 N/mm15.1 N/mm7.7 N/mm4.1 kg
CCR-S4D-150-130-0439.2 N150 mm80 N±2 mm±4.2°1840.4 N/mm407.7 N/mm15.1 N/mm7.7 N/mm6.0 kg
CCR-S4D-150-130-0768.6 N150 mm80 N±2 mm±4.2°1840.4 N/mm407.7 N/mm15.1 N/mm7.7 N/mm6.0 kg
CCR-S4D-150-130-12117.7 N150 mm80 N±2 mm±4.2°1840.4 N/mm407.7 N/mm15.1 N/mm7.7 N/mm6.0 kg