CIRC-FLEXIBRUSH

CIRC-FLEXIBRUSH Radial brushing tool

FEATURES:

The radial brushing tool CIRC-FLEXIBRUSH SERIES 200 can be used for deburring of large parts after machining, rounding of sharp edges (particularly in badly accessible areas) as well as for light deflashing.

The brushing spindle is radially compliant while the necessary pressure is monitored by program control.

The wear of the brush is monitored by a sensor and compensated by program control.

The rotating direction is reversible.

The brushing tool can either be mounted stationary onto a tool stand (Toolstand) or onto the robot arm. If these tools at the robot have to be changed automatically, a tool changer (Changing Systems) is available.

Commercially available cup brushes can be used.

To assure an optimal life of the air motors the compressed air must be cleaned and lubricated.

 Circ-flexibrush 220 Circ-flexibrush 230 Circ-flexibrush 232
Potenza motore
Power
620 W620 W620 W
Velocità rotazione a vuoto
Idling speed
2000 g/min3350 g/min5250 g/min
Velocità nominale
Rated speed
1020 g/min1700 g/min2650 g/min
Direzione di rotazione
Rotating direction
reversibilereversibilereversibile
Movimento di compensazione assiale
Compliance axial movement
16 mm16 mm16 mm
Forza di compensazione a 6 bar
Compliance force at 6 bar
135 N135 N135 N
Avanzamento
Feed forward rate
20-200 mm/sec20-200 mm/sec20-200 mm/sec
Consumo di aria
Air consumption
14.5 l/sec14.5 l/sec14.5 l/sec
Ingressi alimentazione aria
Air connections
2xG1/4, 12/4 mm2xG1/4, 12/4 mm2xG1/4, 12/4 mm
Montaggio spazzola
Shaft end
Ø16j6x40 / key 5h7Ø16j6x40 / key 5h7Ø16j6x40 / key 5h7
Peso
Weight
6.7 Kg6.7 Kg6.7 Kg
Sensore compensazione usura
Sensor wear compensat
24 V induttivo
24 V inductive
24 V induttivo
24 V inductive
24 V induttivo
24 V inductive
Codice articolo
Article-No
3098.220 3098.2303098.232
ACCESSORI OPZIONALI
OPTIONAL ACCESSORIES
Codice
Code
Montaggio spazzola DxL1/L2 = Ø33x32/32 mm
Brush mount DxL1/L2 = Ø33x32/32 mm
3046.202
Montaggio spazzola DxL1/L2 = Ø35x30/35 mm
Brush mount DxL1/L2 = Ø35x30/35 mm
3046.207
Altre velocità e spazzole diverse su richiesta.
Other speeds and brush types on request.
Circ-flexibrush 320 Circ-flexibrush 330 Circ-flexibrush 350
Potenza motore
Power
820 W 820 W 1200 W
Velocità rotazione a vuoto
Idling speed
2350 g/min.3850 g/min3100 g/min
Velocità nominale
Rated speed
1200 g/min1970 g/min 1600 g/min
Direzione di rotazione
Rotating direction
reversibile
reversible
reversibile
reversible
reversibile
reversible
Movimento di compensazione assiale
Compliance axial movement
16 mm16 mm16 mm
Forza di compensazione a 6 bar
Compliance force at 6 bar
135 N135 N135 N
Avanzamento
Feed forward rate
20-200 mm/sec20-200 mm/sec20-200 mm/sec
Consumo di aria
Air consumption
17.5 l/sec 17.5 l/sec 22.5 l/sec
Ingressi alimentazione aria
Air connections
2xG1/4, 12/4 mm2xG1/4, 12/4 mm2xG1/4, 12/4 mm
Montaggio spazzola
Shaft end
Ø19j6x40 / key 6h7Ø19j6x40 / key 6h7Ø19j6x40 / key 6h7
Peso
Weight
7.8 Kg7.8 Kg7.8 Kg
Sensore compensazione usura
Sensor wear compensat
24 V induttivo
24 V inductive
24 V induttivo
24 V inductive
24 V induttivo
24 V inductive
Codice articolo
Article-No
3099.3203099.3303099.350
ACCESSORI OPZIONALI
OPTIONAL ACCESSORIES
Codice
Code
Montaggio spazzola DxL1/L2 = Ø33x32/32 mm
Brush mount DxL1/L2 = Ø33x32/32 mm
3047.202
Montaggio spazzola DxL1/L2 = Ø35x30/35 mm
Brush mount DxL1/L2 = Ø35x30/35 mm
3047.207
Altre velocità e spazzole diverse su richiesta.
Other speeds and brush types on request.
PDF