FLEXIFILE

FLEXIFILE Filing tool

FEATURES:

The filing tool FLEXIFILE is well suited to remove burrs particularly in narrow slots and grooves.

It can be employed for metallic as well as nonmetallic parts.

It is also well suited for the deflashing of aluminum diecasting.
It can be employed in any orientation.

The file tip is compliable in all directions using radial arranged springs to provide the filing pressure onto the part edge.

The filing tool can either be mounted stationary onto a tool stand (Toolstand) or onto the robot arm.

If these tools at the robot have to be changed automatically, a tool changer (Changing Systems) is available.

Commercial filing inserts can be used.
To assure an optimal life of the air motors the compressed air must be cleaned and lubricated.

 FLEXIFILE 2000FLEXIFILE 2100
Corse al minuto
Strokes per min.
20002000
Corsa unitaria
Stroke lenght
8 mm8 mm
Compensazione radiale in tutte le direzioni alla pinza
Compliance radial in all directions at collet
±2.2°/±6.5 mm±2.5°/±6.8 mm
Compensazione torsionale a 6 bar
Compliance torque at 6 bar
-3.8 Nm
Forza di compensazione a 6 bar alla pinza
Compliance force at 6 bar at collet
-24 N
Avanzamento
Feed forward rate
5-150 mm/sec5-150 mm/sec
Consumo di aria
Air consumption
5.2 l/sec5.2 l/sec
Ingressi alimentazione aria
Air connections
BSP1/8BSP1/8
Pinza
Collet
Ø6 mmØ6 mm
Peso
Weight
2.8 Kg2.8 Kg
Codice articolo
Article-No.
1006.2001128.200
ACCESSORI OPZIONALI
OPTIONAL ACCESSORIES
Codice
Code
Codice
Code
Pinza Ø3 mm-1047.003
Pinza Ø6 mm
Collett Ø6 mm
1047.0011047.001
Pinza 1/4”
Collett 1/4”
1047.0021047.002
Lima inclusa
File inserts
su richiesta
on request
su richiesta
on request
PDF