Self-centering vise with lever mechanism and pneumatic or hydraulic drive – 2 jaws
The M vice is normally used on special machines for chip removal, in order to lock the workpiece with absolute precision during the working phase.
This vice is also used in assembly systems.
In order to have perfect interchangeability of the vice on the machine, and item gripper jaws, we carry out the final rectification of centering and height with the assembled vice and with pressure at the same bar required by the customer. This also allows to better simulate the real working conditions.
The vice provides also systems for scraping and trimming to prevent or minimize the intrusion of extraneous bodies. For particularly difficult material working, it can be realized a forced pressurized system to avoid the entry of the dirt through the center or side plate.
|Model||Stroke per jaw||Closing force per jaw|
@ max pressure
|Total closing force|
@ max pressure
|Pressure||Repeat accuracy||Fluid consumption double stroke||Weight|
|The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.|
|M 52||2.5 mm||336 N||671 N||6-9 bar||±0.01 mm||8 cm³||0.6 kg|
|M 85||5 mm||1658 N||3317 N||6-12 bar||±0.01 mm||53 cm³||2 kg|
|M 110||6 mm||2503 N||5006 N||6-12 bar||±0.01 mm||109 cm³||4.5 kg|
|M 140||8 mm||6437 N||12873 N||6-20 bar||±0.01 mm||225 cm³||9 kg|
|M 170||9 mm||11114 N||22229 N||6-20 bar||±0.01 mm||393 cm³||17 kg|
Ambient temperature 5-60°C
Sound emissions (sound pressure) ≤ 70 db (A) in each direction