MAE Self-centering bearing vice with pneumatic and oil-hydraulic working

Self-centering “MAE” vices are widely used on working machine to clamp the work piece.

These vices have an expecially relation between price and quality.

The thrust to obtain the clamping force on the piece is determinate through the pressure with a double-acting incorporated into the vice.

The cylinder, that handle the pistons into the vice, can be embed inside the machine table.
The transmission of the thrust, from hub to grippers, happen through inclinated plane to assure maximal rigidity and precision.

The realisation of the joinds between the particular (drive hub-jaw) are characteristic of Tecnomors‘ vices. The construction of the inclined plane seat inpit up the jaw allowed the height length guide.

The drive hub has an extra guide in the gib to assure an added precision and affidability.
The parts are joined to assure moviments open/close with grinding of centesimal tolerance.
Enterely constructed in UNI 18NiCrMo5 hardened steel.

The final centering adjustments are made after assembly, with vice feeding with working pressure through special equipment (see “Reference Diagram” into “Technical Date”)

All the pieces are made with extreme precision to assure centesimal allowances in construction.
On all our vices the flat jaw guides have inserted gib for greater precision and finishing of the sliding surfaces and so as to regain slack resulting from wear.

The vices “MAE” of Tecnomors are equipped with effective protection against the infiltration of production waste and with inputs for pressurization (see “Protection against infiltration of production” in “Technical Date”).

Vices are made with predisposition for a forced pressurisation and with a strong “Degree of Protection” (IEC 144).
Feeding connections are located at the cylinder’s bottom and laterely the body of the vice.

Corsa tot. griffe
Total stroke
Corsa pistone
Piston stroke
Vol. aria dopp. corsa
Dual stroke air vol.
Forza reale chius. griffa
Actual clamp. force per jaw
(rend./output=0.46) 30bar-daN
Forza teor. chius. griffa
Theor. clamping force per jaw
6 bar-N
Press. di esercizio
Working pressure
Codice articolo
Article code
MAE 6088.619.543105±0.0053-151.5ME060MAA
MAE 801010.86592276±0.0053-183ME080MBA
MAE 1001213126145435±0.0053-186ME100MCA
MAE 1201516.12202277300.013-2011ME120MDA
MAE 1401623.53463101030±0.0053-2015ME140MDA