SWINGCHAM

SWINGCHAM Countersink tool

FEATURES:

The countersink tool SWINGCHAM is being used to countersink holes in metallic as well as nonmetallic parts. It is particularly well suited to work in badly accessible areas.

The countersink is freely compliable in two directions.

The pressure against the part edge can be set from the robot program. The countersink tip of the SWINGCHAM 110 is freely compliable in all directions thanks to its flexible tool mount (flex coupling).

The countersink tool can either be mounted stationary onto a tool stand (Toolstand) or onto the robot arm. If these tools at the robot have to be changed automatically, a tool changer (Changing Systems) is available.

To assure an optimal life of the air motors the compressed air must be cleaned and lubricated.

 SWINGCHAM 100 SWINGCHAM 110
Potenza motore
Power
20 W80 W
Velocità rotazione
Speed
900 g/min500 g/min
Movimento di compensazione
Compliance
± 3.8°± 3.8°
Momento di compensazione a 6 bar
Compliance torque at 6 bar
2.4 Nm2.4 Nm
Consumo di aria
Air consumption
2.5 l/sec 5 l/sec
Ingressi alimentazione aria
Air connections
G1/4, 8/4 mmG1/4, 8/4 mm
Cutter3 mm / 6-esagono 90° / Ø12.4 mm
Diametro montaggio utensile
Tool insert mounting
Ø10 mmØ8 mm
Peso
Weight
2.1 Kg2.8 Kg
Codice articolo
Article-No.
1124.2201124.210
Altre velocità e tipi di fresa su richiesta.
Other speed and cutter types on request.
PDF