SWINGFILE

SWINGFILE Filing tool

FEATURES:

The filing tool SWINGFILE 2000 is well suited to remove burrs particularly in narrow slots and grooves.

It can be employed for metallic as well as nonmetallic parts.

It is also well suited for the deflashing of aluminum diecasting.

It can be employed in any orientation.

The file tip is compliable in two directions.

The pressure against the part edge can be set from the robot program.

The filing tool can either be mounted stationary onto a tool stand (Toolstand) or onto the robot arm.
If these tools at the robot have to be changed automatically, a tool changer (Changing
Systems) is available.

Commercial filing inserts can be used.
To assure an optimal life of the air motors the compressed air must be cleaned and lubricated.

 SWINGFILE 2000SWINGFILE 4000
Corse al minuto
Strokes per min.
20004000
Corsa unitaria
Stroke lenght
8 mm8 mm
Corsa unitaria regolabili
Adjustable stroke lenght
-1-5 mm
Compensazione radiale in due direzioni alla pinza
Compliance radial in two directions at collet
±3.8°/±8.5 mm±3.8°/±6.5 mm
Compensazione torsionale a 6 bar
Compliance torque at 6 bar
2.4 Nm2.4 Nm
Forza di compensazione a 6 bar alla pinza
Compliance force at 6 bar at collet
17 N17 N
Avanzamento
Feed forward rate
5-150 mm/sec5-150 mm/sec
Consumo di aria
Air consumption
5.2 l/sec4.4 l/sec
Ingressi alimentazione aria
Air connections
BSP1/8, M5BSP1/8, M5
Pinza
Collet
Ø6 mmØ3 mm
Peso
Weight
2.4 Kg2.2 Kg
Codice articolo
Article-No
1007.2001008.200
ACCESSORI OPZIONALI CodiceCodice
Pinza Ø3 mm
Collett Ø3 mm
-1049.001
Pinza Ø6 mm
Collett Ø6 mm
1047.001-
Pinza 1/4”
Collett 1/4”
1047.0021049.002
Lima inclusa
File inserts
su richiestasu richiesta
PDF