SWINGTOOL

SWINGTOOL Radial grinding tool

FEATURES:

The radial grinding tool SWINGTOOL SERIES 100 can be used for deburring after machining, rounding of sharp edges (particularly in badly accessible areas) as well as for light deflashing.

The spindle is radially compliant while the necessary pressure is monitored by program control.

The grinding tool can either be mounted stationary onto a tool stand (Toolstand) or onto the robot arm. If these tools at the robot have to be changed automatically, a tool changer (Changing Systems) is available.

Commercially available radial grinding tools can be used.

To assure an optimal life of the air motors the compressed air must be cleaned and lubricated.

 SWINGTOOL 125SWINGTOOL 128SWINGTOOL 155SWINGTOOL 158SWINGTOOL 178SWINGTOOL 180SWINGTOOL 185
Potenza motore
Power
390 W240 W 390 W240 W240 W820 W760 W
Velocità rotazione a vuoto
Idling speed
5600 g/min3840 g/min3100 g/min2090 g/min14000 g/min18000 g/min7000 g/min
Velocità nominale
Rated speed
2600 g/min1960 g/min1460 g/min 1090 g/min7000 g/min18000 g/min7000 g/min
Compensazione radiale in due direzioni
Compliance radial in two directions
± 3.8°± 3.8°± 3.8°± 3.8°± 3.8°± 3.8°± 3.8°
Compensazione torsionale a 6 bar
Compliance torque at 6 bar
2.4 Nm2.4 Nm2.4 Nm2.4 Nm2.4 Nm2.4 Nm2.4 Nm
Avanzamento
Feed forward rate
5-100 mm/sec5-100 mm/sec5-100 mm/sec5-100 mm/sec10-200 mm/sec10-200 mm/sec10-200 mm/sec
Consumo di aria
Air consumption
8.3 l/sec8.3 l/sec8.3 l/sec8.3 l/sec7.8 l/sec 17.4 l/sec18.9 l/sec
Ingressi alimentazione aria
Air connections
G1/4,8/4mmG1/4,8/4mmG1/4,8/4mmG1/4,8/4mmG1/4,8/4mmG3/8,12/4mmG3/8,12/4mm
Montaggio spazzola
Collet
Ø6 mmØ6 mmØ6 mmØ6 mmØ6 mmØ6 mmØ6 mm
Peso
Weight
3.5 Kg 3.5 Kg 3.5 Kg 3.5 Kg 3.5 Kg3.8 Kg3.8 Kg
Sensore compensazione usura
Sensor wear compensation
24V, induttivo24V, induttivo24V, induttivo24V, induttivo24V, induttivo24V, induttivo24V, induttivo
Codice articolo
Article-No
1112.2151112.1281112.1551112.158 1112.178 1112.1801112.185
ACCESSORI OPZIONALI
OPTIONAL ACCESSORIES
Codice
Mandrino a pinza 3/8”-24UNF disponibile solo per Swingtool: 125,155,180,185
Collett chuck 3/8”-24UNF available only for: 125,155,180,185
8999.001
Pinza Ø6 mm disponibile solo per Swingtool: 125,155,180,185
Collett Ø6 mm available only for Swingtool: 125,155,180,185
8999.003
Pinza Ø8 mm disponibile solo per Swingtool: 125,155,180,185
Collett Ø8 mm available only for Swingtool: 125,155,180,185
8999.004
Pinza 1/4” disponibile solo per Swingtool: 125,155,180,185
Collett 1/4” available only for Swingtool: 125,155,180,185
8999.006
Mandrino per forare 3/8”-24UNF / 1-8 mm disponibile solo per Swingtool: 125,155,180,185
Drill chuck 3/8”-24UNF / 1-8 mm available only for Swingtool: 125,155,180,185
8997.001
Mandrino a pinza disponibile solo per Swingtool: 128,158,178
Collet holder compl. available only for Swingtool: 128,158,178
3143.200
Pinza Ø6 mm, 1/4” disponibile solo per Swingtool: 128,158,178
Collett Ø6 mm, 1/4” available only for Swingtool: 128,158,178
8985.013
Altre velocità, motorizzazioni e tipi di spazzole diversi su richiesta.
Other speeds, reversible motors and brush types on request.
PDF